HELLO PEOPLE FROM THE NEW GENERATION! This time, we´ll show you how to disassemble the door in an equipped Jetta A4 in some previous videos I showed you how to do it in a common Jetta but this time, we´ll work with an equipped one, which has the windows controls and to start, the first thing we need to do…here we´re going to find a piece A plastic piece. Pop that piece out; you might use a screwdriver and remove it in this way! once that piece is out; pull this piece upwards like this! And now unplug the harness it has at the back here, we´ll find three screws but in this case it has only two but it supposed to have the three of them which are the ones we´re going to remove once you removed all of the screws in all of the cars, there is a phillips screw in this side here we can see the hole but in this case, it doesn´t have it it should but it doesn´t. You might remove it with a cross screwdriver now, here at the bottom; we´ll find three more screws I´ll zoom them so you can see them in this car it has some other screws but they should originally be Torx once we removed the three screws, what follows is to pull the door panel…in this way and once it is fully loosen, you´re going to pull it upwards you need to loose this hook, in this case it was out of its place already and it´s the one that opens the door by the inside and unplug all of the harnesses you find at the back and in this way you´ll have the door disassembled Well, that´s it. We hope we have helped you and you know if you have any doubt or question, you may leave it in the comments below If you liked the video please give a Thumb Up! SUBSCRIBE and share it with someone who might need it. So that´s it; SEE YOU IN THE NEXT VIDEO!