Connecting a Lyric Alarm to the Local WiFi
The Best Place to Install a Lyric Alarm System
Honeywell Lyric Alarm System: DIY Installation

Honeywell Lyric Alarm System: DIY Installation

Hi, DIYers. Sterling with Alarm Grid here. And today, we’re going to show you how to install the brand new all-in-one wireless Honeywell Lyric system. Very similar to the Honeywell LYNX Touch panels that you might have seen us install before in prior videos. This Honeywell Lyric is a self-contained system. The control panel or

Lyric Security System: Installer Code P2

Lyric Security System: Installer Code P2

Once you do 4112 after hitting tools, now you’re in the installer level programming. It’s asking us to connect to the server. Again, it’s looking to connect to AlarmNet because this system is not yet enabled for monitoring. We’re just going to say no. But now we’re into the deeper level installer programming. You have

Lyric Security System: Mounting Backplate to the Wall
Getting Power to the Lyric Security System

Getting Power to the Lyric Security System

Hey, DIY-ers. Jarrett with AlarmGrid here. Today, we’re going to discussing how you would give power to the Honeywell Lyric System. Now, the Honeywell Lyric is able to be powered up by its own custom wire if you wanted to, but normally, we actually do recommend that you use what’s called the Honeywell LTE cable.

Can I Use the Skybell DBCam Trim w: a Lyric Security System?
Honeywell Lyric Security System – How to Adjust Siren Duration?

Honeywell Lyric Security System – How to Adjust Siren Duration?

Hey everybody alarm club security here and today we’re continuing on our Honeywell lyric wireless security and home automation system how-to video series and today we’re going to show you how to adjust the siren duration and means when this system goes into an alarm desire and will end up timing out eventually and you

Honeywell Lyric Alarm System: Adding Hardwire Zones
Lyric Security System: Add Sub User Codes

Lyric Security System: Add Sub User Codes

Hi DIYers. Sterling with Alarm Grade here. Today we are going to show you to add sub-user codes to your Honeywell lyric system. We have a video that describes master code programming versus installer code programming. So the panel comes with two code set out of the box. The master code is 1234. That is